|
| |
| Heat Tracer Thermotrace |
|
Thermotrace CTL Electrical Heat Tracers are the apt solution to maintain product temperature inside Vessels, Tanks, Pipeline or Equipments. Thermotrace CTL keeps viscous fluids in flow state avoiding choking of pipelines.
Thermotrace CTL PT (PTFE insulated), CTL SR (Silicon Rubber insulated) is positioned to serve virtually in every process industry - Oil & Gas, Petrochemical, Power, Chemicals & Fertilizers, Metallurgical, Cement, Pharma, Food and Edible oil industries.
Thermotrace CTL-ZH (Polyolefin insulated) finds application for freeze protection in commercial and industrial Segments.
|
|
|
|
|
|
| Self Trace Stf |
STF is a self-limiting heating tape for applications for freeze protection applications in pipelines. STF comprises of the inner insulation of TPE material and outer jacket of Fluoropolymer/TPE.
Construction
|
 |
| |
| 1) |
Buswires |
| |
|
| 2) |
Semi conductive heating core extruded over bus wire |
| |
|
| 3) |
TPE Insulation |
| |
|
| 4) |
Coated copper braid to give a continuous ground path. |
| |
|
| 5) |
Outer jacket of UV Resistant Flouropolymer/TPE to enable use in |
|
|
|
|
|
|
| Self Trace Stp |
STP is a self limiting tracer suitable for high temperature applications up to 120 C. STP allows steam cleaning in pipes. The insulation and the outer jacket of the STP are made of fluoropolymers capable of withstanding high temperatures and providing protection against chemicals & abrasion.
Construction
|
 |
| |
| 1) |
Buswires |
| |
|
| 2) |
Semi conductive heating core extruded over bus wire |
| |
|
| 3) |
Fluoropolymer Insulation |
| |
|
| 4) |
Coated copper braid to give a continuous ground path. |
| |
|
| 5) |
Outer jacket of Fluoropolymer to enable use in corrosive areas. |
|
|
|
|
|
|
| Heated Hoses |
Heated Hoses are needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature during Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers and Food Processing. These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
|
|
| Construction |
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.
|
|
|
|
|
|
| Heating Jackets |
|
Thermo Heating Jackets are ideally suited to raise or maintain elevated temperatures of the contents in reaction vessels, storage tanks, tankers and process equipments in industries. They find application in chemical and pharmaceutical industry to heat viscous fluids, cement industry in hopper heating to remove moisture in the flue gases, in packaging industry for free flow of gums and in metallurgical industry for annealing of metals, etc.
This flexible electric heater provides heat from the external surface of the device to be heated. They eliminate high investment and operating costs associated with steam, oil, fire wood & conventional electric heating.
|
|
|
| Construction |
|
Thermo heating jackets comprise of flexible heating elements, distributed very uniformly on to a fibreglass or quartz cloth carrier. The fibreglass or quartz cloth carrier is tailored to the shape of the vessel to be heated. Eye-lets and laces provided on the panels, ensure a snug fit of heater on the surface being heated, avoiding any air gaps. The heating elements terminate on cold leads, which are connected to the power supply.
|
|
|
|
|
|
|
|
|
|
| Drum Heaters |
|
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
|
 |
| Construction |
|
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters.
|
|
|
|
|
|
|
|
|
| Electronic Thermostat |
Description / Specification of Electronic Thermostat
We are involved in offering a wide range of Electronic Thermostat to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Electronic Thermostat. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
| Self Trace Gdit Sr |
| Self Trace GDIT-SR range of self regulating cables can be used for protection against freezing on roofs or roof gutters. |
| Operating Principle |
|
Selftrace derives its self-regulating characteristic from the inherent properties of the semi conductive core material.
|
| |
| As the core material temperature increases, the number of conductive paths in the core material decreases, thus decreasing the heat output. As the temperature decreases, the number of conductive paths increases, causing the heat output to increase. This occurs at every point along the cable’s length, adjusting the power output to the varying conditions. As the cable self-regulates its heat output, it limits the maximum sheath temperature, thus making it burn-out proof. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Gutterguard Gdit Zh |
Thermo GutterGuard – the Gutter De-Icing Tracers are uniquely designed electrical heating cables, used for preventing ice or snow buildup, or “Ice Dams”, from forming in the gutters, downspouts or overhangs.
The GDIT-ZH Gutter De-Icing Tracers is available with 30 watts/ m output.
|
Construction
GDIT-ZH is a parallel tracer and require external control device for maintaining the required temperature. It consists of a metal braiding which makes it mechanically tough and sturdy. The outer sheathing of LSZH – the environment friendly, fire retardant and UV Resistant compound, makes it apt for the application. |
|
|
|
|
|
|
|
|
|
| Concrete Curing Cable |
|
|
Concrete Curing Cable (CCC-T)
|
Concrete Curing Cable (CCC-T) is specially designed for fast curing of concrete floors of new homes, outdoors in driveways, parking lots, gutters etc. They are aptly suited for indoors and outdoors large areas.
|
| Construction |
Concrete curing cable consists of a resistance element provided with fluoropolymer insulation, metal shielding of 100 % coverage and outer sheathing of Polyolefin.
Concrete curing cable is terminated on cold lead with 16 amp moulded plug. The hot and cold junction is uniquely designed to make it 100% fool proof.
|
|
|
|
|
|
|
|
|
| Floor Heating Cables |
|
Thermo Floor Heating Cables (FHC) again a robust and tough cable which can be embedded in the concrete slab floors for floor heating applications. FHC are ideally suited for installation in large areas like homes, green houses, sports fields, warehouses, shopping malls or factories.
|
|
| Construction |
|
FHC comprises of a resistant element provided with a primary insulation of fluoropolymer, covered with Earth Screen and Low Smoke Zero Halogen. They terminate on cold leads of 2.5m length.
Heating cables could be single conductor with 4.5 mm outer diameter and terminating on cold leads at two ends of the Heating Cable or could be twin conductor with 5.3 mm outer diameter and terminating on cold leads at one end of Heating Cable. FHC comes with a 2.5m length cold leads as a standard.
|
| |
|
|
|
|
|
|
|
|
| Aluminium Foil Defrost Heater |
|
Anti-condensation & Defrost Heaters are Aluminium Foil heaters and ideally suited for surface heating applications. These heaters are used for anti-condensation and defrosting applications in refrigerators, cold storages and similar applications.
These are also used in mirror heating for removal of moisture on mirrors in bathrooms. Other applications include Battery Warmers, Cabinets, Heated Food Tables, Laboratory & Medical Equipment and Incubators etc.
|
|
| Construction |
|
Aluminium Foil Heaters comprises PVC insulated heating element, heat welded to vinyl coated side of Aluminium foil or PVC/Silicon Rubber insulated heating element, sandwiched between two layers of Aluminium foil. The bottom side of the Aluminium foil is provided with pressure sensitive adhesive coating for fixing on the surface to be heated. The heating element ends on cold lead of desired length for power connection.
Aluminium Foil heaters can also be provided with a temperature limiter preset at desired temperature for precise control.
|
|
|
|
|
|
|
|
|
| Thermo Crankcase Heater |
| Application |
|
A crankcase heater is an electrical component in a compressor in an air-conditioning system, heat pump system, or a chiller system. The crankcase heater is normally ON all the time even when the unit is not running, though temperature sensors and set points may be used to turn it off when not needed.
A crankcase heater's sole purpose is to prevent refrigerant migration and mixing with crankcase oil, when the unit is off, and to prevent condensation of refrigerant in the crankcase of a compressor. The crankcase heater is designed to keep the refrigerant at a temperature higher than the coldest part of the system. The resistance of the crankcase heater determines the heat it will produce when voltage is applied.
|
|
| Features |
- Helps prevent compressor burnout
- Quick, Safe and easy to fit
- Silicone insulated Heating Cable
- Metal sheath for earthing and mechanical protection
- 1.0 m cold lead
- Standard 230 V power supply
- Thermostat on request
|
|
|
|
|
|
|
|
|
| Door Heating Cable |
|
The main feature of Door Heating Cable (SHC-CTL) is a uniform specific charge on its entire length, granting the possibility to manage the specific power independently from the required cable length.
Cut to length constant power output cables are manufactured by winding the heating wire to the phase and neutral bus bars on which silicone rubber is extruded.
A section of the insulation on bus bar is removed after each 500mm creating the electrical contact. The product is provided wound in coils, to be cut and finished according to the specific needs.
A metal braid can be added on the external Silicone rubber insulation to protect the cable from mechanical stress and improve its thermal distribution. It can act as well as grounding.
Door Heating Cables are designed for use in industrial and commercial refrigeration (anticondensation for refrigerated display cabinets, doors for cold storage rooms). Their great flexibility suits the requirement of industrial and commercial refrigeration.
|
|
| Features of SHC-CTL Cables: |
- Can be cut to length on site.
- Extremely simple termination.
- Cold tail incorporated: no extra connection necessary.
- Available as 30, 40 and 50 W/m.
- Power supply: 230 V a.c.
- With optional coated copper/SS braid for mechanical protection and earthing.
|
|
|
|
|
|
|
|
|
| Snow Melting Cables |
|
Thermo Snow Melting Cables (SMC) are thick cables for embedding in concrete, asphalt or under pavement surfaces. These are widely used in drive ways, pavements, roads, ramps, bridges, parking-bays etc., to melt snow or ice during winter seasons.
SMC is one of the best solutions for preventing ice from damaging roofs and gutters and causing a personal injury.
|
|
| Construction |
|
Snow Melting Cable consists of a resistance element provided with primary fluoropolymer insulation, metal shielding and secondary insulation of Low Smoke Zero Halogen.
Heating cables could be single conductor with 5.0 mm outer diameter and terminating on cold leads at two ends of the cable or could be twin conductor with 6.0 mm outer diameter and terminating on cold leads at one end of the mat. SMC comes with a 5.0 m length cold leads as a standard.
|
|
|
|
|
|
|
|
|
|
| Snow Melting Mat |
|
Thermo Snow Melting Mat (SMM) is a pre-engineered solution for outdoor snow and ice melting applications, not requiring the assistance of a qualified and experienced technician for designing lay-outs. Like Snow Melting Cables, they can be widely used in drive ways, Pavements, Roads, Ramps, Bridges etc., under concrete or asphalt to melt the snow or ice during winter seasons.
|
|
|
| Construction |
|
SMM comprise of flexible plastic grid that carry heating cable uniformly fixed on it. The heating cable is a snow melting cable consisting a resistance element provided with primary fluoropolymer insulation, metal shielding and secondary insulation of Low Smoke Zero Halogen.
Heating cables could be single conductor with 5.0 mm outer diameter and terminating on cold leads at two ends of the mat or could be twin conductor with 6.0 mm outer diameter and terminating on cold leads at one end of the mat. SMM come with a 5.0 m length cold leads as a standard.
|
|
|
|
|
|
|
|
|
|
| Freeze Protection Cables |
|
Thermo Freeze Protection Cables (FPC) are the robust and tough cables designed for "on pipe" as well as "in pipe" applications in domestic
and commercial requirement to protect water from freezing. They are adaptable to all areas where natural frost protection cannot be achieved.
|
| We can offer three varieties of Freeze Protection Cables - |
|
FPC-C : FPC-C is a twin conductor series resistance heating cable comprising of resistance elements provided with primary insulation of Fluoropolymer, then metal sheath on twin conductor and Polyolefin outer jacket. They terminate on cold leads of 2.0m length with plug.
FPC-CT : Freeze Protection Cable - Constant Watt type with inbuilt temperature limiter.
FPC-SR : Freeze Protection Cable - Self Regulating type.
|
|
| Construction |
|
FPC consists of a heating element provided with primary Fluoropolymer insulation covered with a metal sheath and outer sheath of polyolefin material. These are available in a wide range of capacities in predetermined lengths with 2M cold lead and a plug as a standard.
|
|
|
|
|
|
|
|
|
|
| Thermotar Asphalt Snow Melting Cables And Mats |
|
ThermoTAR Snow Melting Cables (SMC-FE) and Snow Melting Mats (SMM-FE) are special cables with enhanced temperature withstand ability and mechanical strength. These can be used for asphalt drive-ways, pavements, roads, parking-bays, when hot asphalt is directly poured on the cable while laying.
Asphalt from the asphalt machine in general has a temperature of 170-240 �C. SMC-FE cables and SMM-FE mats are suitable for withstanding this temperature for up to 10 minutes. The cable is developed according to IEC 800 Class C, which means that the cable has deformation strength of 2000N.
|
|
| Construction |
|
The ThermoTAR range consists of a resistance element provided with primary fluoropolymer insulation, metal shielding and secondary insulation of high temperature material.
Heating cables could be single conductor with around 6.0mm outer diameter terminating on cold leads at two ends of the cable or it could be twin conductor with around 7.0mm outer diameter and terminating on cold leads at one end of the cable. Asphalt SMC comes with a 5.0 m length cold leads as a standard.
|
|
|
|
|
|
|
|
|
| Foot Warmer |
| Application |
Cold feet can be both uncomfortable and distracting, especially when you are at work or study in office or home. The Thermopads’s Thermofoot Cozy is intended to warm your feet while you keep a cool head. It uses less energy than an average light bulb. You save the electricity by using the Thermopads’s Thermofoot Cozy and turning your room heating down or even off.
|
|
|
|
|
|
| Heating Cables Hc3 And Ex Hc3 |
|
Thermo Heating cables HC3/Ex-HC3 are the hardy and tough heating cable. When the ambient runs low, strap our workhorse heating cable and keep the fluid flow.
Heating cables HC3/Ex-HC3 maintains temperatures in pipelines and storage tanks to keep fluids in flow state. They are the ideal for process heating requirements in Oil & Gas, Petrochemical, Power, Chemicals & Fertilizers, Metallurgical, Cement, Pharma, Food and Edible oil industries.
|
|
|
| Construction |
|
Heating cables HC3/Ex-HC3 is a series type heating cable with single conductor (multi strand & spiraled) heating element with a primary PTFE insulation, metal braid and Fluoropolymer Outer Jacket. Each length of Heating cables HC3/Ex-HC3 requires termination kits with cold lead for power connection
|
|
|
Concrete Curing Cable (CCC-T) is specially designed for fast curing of concrete floors of new homes, outdoors in driveways, parking lots, gutters etc. They are aptly suited for indoors and outdoors large areas.
|
| Construction |
Concrete curing cable consists of a resistance element provided with fluoropolymer insulation, metal shielding of 100 % coverage and outer sheathing of Polyolefin.
Concrete curing cable is terminated on cold lead with 16 amp moulded plug. The hot and cold junction is uniquely designed to make it 100% fool proof.
|
|
|
|
|
|
|
|
|
| Heat Tracer Thermotrace Ctl |
Description / Specification of Heat Tracer Thermotrace Ctl
We are involved in offering a wide range of Heat Tracer Thermotrace Ctl to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Heat Tracer Thermotrace Ctl. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
| Heat Tracers Thermotrace Ftt |
| |
HEAT TRACERS: THERMOTRACE - FTT
(the factory terminated heat tracer for industries) |
|
Thermopads FTT are the most robust heat tracers for heating contents of pipelines, storage tanks & accessories in process industries like oil & gas, petrochemical, power, chemicals & fertilizers, metallurgy, cement, pharmacy, food and edible oils. .
FTT is an alternate to Thermotrace CTL, where pipeline lengths and layouts are frozen and hence required lengths of heat tracers could be predetermined.
|
|
| Construction |
|
Thermotrace FTT is a constant wattage, Series type heat tracers consisting of "Go and Return" multistrand heating elements insulated with PTFE. The entire tracer is Stainless Steel wire braided for mechanical protection and earth continuity. The heating element terminates on cold leads with suitable gland connections. An outer jacket is offered as an option for corrosive atmospheres
|
|
|
|
|
|
|
|
| Hermotrace Self Limiting Tracer |
Thermotrace Self Limiting Tracer is ideally suited for high temperature applications for Tanks & pipeline. It is suitable for maintaining temperatures up to 180 Deg.C. These tracers can withstand temperatures associated with steam purging operations in the pipelines.
|
|
|
|
|
| Hopper Heaters |
Thermo Hopper heating systems play an important role in the removal of fly ash from precipitators and bag filter hoppers. The hopper heater is designed to preheat the hopper to prevent moisture condensate from collecting in it during startup conditions. In addition, they maintain the hopper and fly ash at temperatures above the flue gas acid dew point during normal operating conditions
Construction
Thermo Hopper Heater comprise of Flat heating elements and Wire type elements, uniformly distributed and sandwiched between multiple layers of fiber glass cloth. This complete assembly is housed in tamper proof rugged high temperature resistant Aluminum Body. The Heating element is connected to power supply through Fibre Glass insulated and Silicon Rubber sheathed Cable
|
|
|
|
|
| Insulation Pads |
|
Thermal Insulation Pads are ideal for gas turbines, valves, filters, meters and other accessories in a process line. They insulate the hot surface, ensuring energy conservation, protection of operators and providing comfortable work environment. These are typically used as a backing over the heating jacket or heating panel, to ensure better heat efficiencies and minimal energy loss is minimal.
The flexible construction of 'Thermo Insulation Pads' enables tailoring to any complex shapes and providing a perfect, snug fit on complex shaped surfaces.
|
|
| Construction |
Insulation pads consist of 2" thick (or as required) lagging of fibre glass wool insulation, embedded in two layers of fibre glass cloth. Outer layer of fibre glass cloth can be flame retardant aluminized or PVC coated or Teflon coated as required.. The final pad is shaped based on the required surface to be insulated to encapsulate the surface or equipment in it. Required cutouts for obstructions and velcrow or eyelets and strapping lays are provided to make it snug fit on the surface or equipment.
|
| |
|
|
Range
|
Insulation pads are designed for a maximum surface temperature of 300ºC.
Every Insulation pad is custom designed based on customer requirement. |
|
|
|
|
|
|
|
|
|
| Heating Mantles |
Heating Mantles are an integral requirement for heating various substances in many sectors of Research & Developments, Production and Training.
Applications of heating mantles are in Chemical and biochemical laboratories for temperature dependent reactions and distillation in organic chemistry. Another major range of applications can be found in chemical process technology and biotechnology.
Construction
An even heat transfer and consideration for laboratory glassware is ensured by our tried and tested high-quality heating elements which are adopted to fit the respective vessel shapes and sizes. The built-in extremely effective thermal insulation prevents heat losses to the outside. The continuous adjustable power regulator ensures optimum adaptation to the specific power requirement. The maximum temperature of the heating element is 450 �C for all models of Heating Mantles.
Range
We offer a wide range of heating mantles for all standard laboratory glassware in volumes from 100ml up to 20Liters. We also design special products as per customer requirements for all types of specialized glassware.
|
|
|
|
|
| Thermo Heating Blanket And Blade Repair Mat |
Blades can be damaged or degraded by several factors. Working at optimum conditions, a blade tip could be turning at speed well over 100 miles an hour. Many factors like sand, ice, rain, UV rays, insects etc.. can have serious adverse effects on the leading edge. Lightning and bird strikes can also lead to damage and reduction in productivity. Over time, the blade is subjected to a serious amount of damage.
|
|
|
|
|
| Mould Heating Cable He 1 |
|
Thermo Heating Cable HE 1 find applications in various industrial and appliance heating. The use of Thermo Heating Cable HE 1 for Mould industry testifies our mission of keeping pace with the latest technologies. HE1 Heating Cables are used for heating moulds
|
| Construction |
|
The HE1 Heating Cable is an electrical resistance heating wire insulated with PTFE. The resistance of the heating wire depends on the heating requirements of the specific applications and can be supplied with an outer metal shielding and an optional outer jacket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
